Input select
Direct Operation
Press HDMI, VGA, COMOPNENT, S-VIDEO
or VIDEO button to select HDMI, Computer,
Component, S-video or Video as input source.
Top control
Menu operation
1 Press MENU button on the remote control or
top control to display the input select menu.
2 Press button to select HDMI, Computer,
Component, S-video or Video , then press
OK button.
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable,
please select HDMI.
When input source is from
Computer 1
computer connected to
CONPUTER IN 1 terminal
with VGA cable, please select
Computer 1.
When input source is from
Computer 2
computer connected to
CONPUTER IN 2/COMPUTER
OUT terminal with VGA cable,
please select Computer 2.
Select it when the input source
Component
is from the video equipment
connected to Y, Cb/Pb, and Cr/
Pr terminals with a RCA cable.
Select it when the video input
S-video
signal is connected to S-VIDEO
terminal.
Select it when the video input
Video
signal is connected to VIDEO
terminal.
Note:
- When the Input Search function is set to On in the Auto setup function, the input signal will be
searched automatically.
- When COMPUTER IN 2/COMPUTER OUT terminal is used as COMPUTER OUT, Computer 2
can not be selected.
26
Downloaded From projector-manual.com ASK Manuals
INPUT button
Remote control
INPUT button
HDMI
button
COMPONENT
VIDEO
button
button
Input select menu
HDMI
Computer 1
Computer 2
Component
S-video
Video
VGA button
S-video
button