Answering System Settings - Sharp UX-A760 Operation Manual

Answering System Settings

Answering System Settings
Call screening
Each time a caller calls and leaves a
message in the answering system, you
can have the caller's voice broadcast
through the speaker.
♦
You can pick up the handset while the
caller is speaking to answer the call.
This allows you to monitor incoming
calls and take only those calls that you
wish to answer immediately.
Initial setting: YES
1 F
Press ,
2
Press (YES) to turn on Voice
Monitor.
Press (NO) to turn off Voice
Monitor.
3
Press
Maximum allowed recording time
The answering system is initially set to
allow each caller a maximum of 4
minutes to leave a message. If desired,
you can change this setting to 15, 30, or
60 seconds.
1 F
Press ,
34
, , and
to exit.
, , and .
2
Press a number to select the
recording time:
15 seconds
30 seconds
60 seconds
4 minutes
3
Press
OGM Only mode
Turn on this function if you want your
outgoing message to play but do not
want to let callers leave messages.
(The machine will receive faxes sent by
automatic dialling.)
Initial setting: NO
1 F
Press ,
2
Press (YES) to turn on OGM
Only mode.
Press (NO) to turn off OGM
Only mode.
3
Press
to exit.
, , and
to exit.