Sharp UX-A760 Operation Manual page 13

7
Insert the new roll of film into the
print compartment:
a. Fit the right ends of the spools
onto the pins.
b. Place the left ends so that the
shafts of the gears fit into the
holders.
8
Turn the front gear in the direction
shown until the film is taut.
•
If there is a label on the film,
continue to turn the gear until the
label is no longer visible.
9
Close the print compartment cover.
•
Press down on the
both sides of the cover to make sure
it clicks into place.
10
Close the operation panel.
Imaging Film
marks on
11