Loading Paper
Loading Paper
Approximately 10 sheets of A4-size
2
paper (80 g/m
) can be loaded in the
paper tray (at room temperature).
1
If the paper tray is closed, open it.
2
Pull out the tray extension.
3
Fan the paper, and then tap the
edges against a flat surface to even
the stack.
12
4
Insert the stack of paper into the
tray, print side down.
•
If paper remains in the tray, take it
out and combine it into a single stack
with the new paper.
•
Printing on the reverse side of the
paper may result in poor print quality.
•
Do not use paper that has already
been printed on or is curled.
Note: If paper is left in the tray a long
time, it will become curled. Curled
paper will not feed properly and may
cause a paper jam.
When not using the machine:
When not using the machine, keep
the paper tray closed.