Optional Answering Machine Settings - Sharp FO-A660 Operation Manual

Optional Answering Machine Settings

Optional Answering Machine Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on
the built-in answering machine. The answering machine is set at the factory to
allow each caller a maximum of 4 minutes to leave a message. If desired, you
can change this setting to 15, 30, or 60 seconds.
1
FUNCTION
Press
2
Press
3
Press
4
Press a number from 1 to 4 to select the desired ICM recording time.
15 seconds
1
30 seconds
2
STOP
5
Press
Fax mode on A.M. failure
If the memory for recording incoming messages becomes full while you are
out, the answering machine will no longer be able to record messages. The
ON A.M. FAILURE setting is used to select whether or not the reception mode
will switch to FAX mode when this happens:
♦
YES (switch to FAX mode): The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see Remote Operations on page 37).
30
once and
once and once.
.
The display briefly shows
your selection, then:
to return to the date and time display.
once.
60 seconds
3
4 minutes
4
Display:
A.M. SETTING
RECORDING TIME
REMOTE CODE