Sample roll of
imaging film (already
loaded in machine)
Points to keep in mind when
Do not place the machine in direct
Do not place the machine near
heaters or air conditioners.
Keep dust away from the machine.
Keep the area around the machine
If the machine is moved from a cold to a
warm place, condensation may form on
the scanning glass, preventing proper
document scanning. To remove the
condensation, turn on the power and
wait approximately two hours before
using the machine.
Connecting the handset
Connecting the power cord
Plug the power cord into a
, earthed AC outlet.
The power outlet must be installed
near the equipment and must be
It is recommended that you install
surge protectors for the power and
telephone lines. Surge protectors can
be purchased at most telephone