Fax Receive setting
If you prefer that faxes not be received
to memory, follow the steps below to
change the Fax Receive setting to
"PAPER".
♦
When the Fax Receive setting is
"PAPER", fax reception will not take
place (a communication error will
occur) if a problem occurs that
prevents printing. However, there is no
concern that fax reception will be
prevented by the memory being full.
♦
When "PAPER" is selected, make
sure there is paper in the paper tray.
Initial setting: MEMORY
1
F
Press
,
2
Press
(MEMORY) to receive
faxes to memory before printing
them out.
Press
to have received faxes
printed without receiving them to
memory.
3
Press
to exit.
,
, and
.
Reception to Memory
Erasing received faxes from
memory
When received faxes are held in
memory due to a printing problem, you
can erase the faxes from memory
without printing them out.
Caution: When this procedure is
performed, the faxes will be lost.
1
UX-P710: Press
UX-A760: Press
2
Press
,
Checking how much memory is
currently in use
To check the percentage of memory
currently in use, press
percentage will appear briefly in the
display.
.
C
.
.
F
,
. The
31