Specifications; Dimensions & Option; Specifications 6-1 Specifications - Optex AX-100TFR Installation Instructions Manual

6

SPECIFICATIONS

6-1 SPECIFICATIONS
Model
Range
Maximum arrival distance
Detection method
Beam frequency selection
Interruption period
Power Source
Current draw
Transmitter
* Battery
life
Receiver
Alarm output
Alarm period
D.Q. output
Low battery output
Output
** Tamper output
for Front cover
Tamper output
for Back box
Alarm Indicator
(Receiver)
Indicator
Power
(Transmitter)
Low battery
Operating temperature
Operating ambient
humidity
Alignment angle
Mounting
Weight
International protection
Specifications and design are subject to change without prior notice.
* The value is based on the condition that it is used within the
ambient temperature range of 20 to 25°C.
** The transmitter is also equipped with AX100/200 TFR (BE).
OPTEX CO., LTD. (JAPAN)
(ISO 9001 Certified)
(ISO 14001 Certified)
5-8-12 Ogoto Otsu
Shiga 520-0101
JAPAN
TEL: +81-77-579-8670
FAX: +81-77-579-8190
URL: http://www.optex.co.jp/e/
AX-100TFR AX-200TFR
30 m (100 ft.) 60 m (200 ft.)
265 m (870 ft.) 530 m (1740 ft.)
Infrared beam interruption detection
4 channel
Variable between 50, 100, 250, 500 msec
(4 steps)
3.6 V 13.0 Ah: LSH20 lithium batteries
manufactured by SAFT (not installed)
Transmitter: 2 units Receiver: 2 units
620 µA 810 µA
T: 300 µA + R: 320 µA T: 490 µA + R: 320 µA
(at 25°C, 3.6 VDC) (at 25°C, 3.6 VDC)
3 years
5 years
5 years
Form C-Solid State Switch: 3.6 VDC, 0.01 A
2 sec (±1) nominal
Form A/B-Solid State Switch: 3.6 VDC, 0.01 A
Form A/B-Solid State Switch: 3.6 VDC, 0.01 A
(Transmitter & Receiver)
Form C: 3.6 VDC, 0.01 A
activates when cover removed. (Receiver only)
Form C: 3.6 VDC, 0.01 A
activates when either back box or chassis is
removed from the installment.
(1) Light on - IR Beam not received.
(2) Flickering Light - IR Beams not received
sufficiently.
(3) Light off - IR Beams received.
Power ON: ON,
Power OFF: OFF
Voltage Reduction: flicker
-20°C – +60°C (-4°F – +140°F)
95% (Max.)
±90° Horizontal, ±5° Vertical
Indoor/Outdoor, Wall/Pole/Tower mounting
(Optional main unit mounting brackets are
required, when the units mount in the tower.)
1600 g (56.5 oz.)
(Total weight of transmitter + receiver,
excluding accessories)
IP55
OPTEX INCORPORATED (USA)
TEL: +1-909-993-5770
Tech: (800)966-7839
URL: http://www.optexamerica.com
OPTEX (EUROPE) LTD. (UK)
TEL: +44-1628-631000
URL: http://www.optexeurope.com
OPTEX SECURITY SAS (FRANCE)
TEL: +33-437-55-50-50
URL: http://www.optex-security.com
6-2 DIMENSIONS & OPTION
-Dimensions
88.1 (3.47)
-Option
MP-4: Main unit mounting bracket set (for tower mounting)
Main unit mounting bracket
Tamper Bushing
Without the tamper busing, the LEDs are
kept ON, which consumes more battery
power.
NOTE
These units are designed to detect an intruder and activate
an alarm control panel. Being only a part of a complete
system, we cannot accept responsibility for any damages
or other consequences resulting from an intrusion.
These products conform to the EMC Directive 2004/108/EC.
-12-
162.5 (6.4)
OPTEX SECURITY Sp.z o.o. (POLAND)
TEL: +48-22-598-06-55
URL: http://www.optex.com.pl
OPTEX KOREA CO., LTD. (KOREA)
TEL: +82-2-719-5971
URL: http://www.optexkorea.com
OPTEX (DONGGUAN) CO., LTD.
SHENZHEN OFFICE (CHINA)
TEL: +86-755-33302950
URL: http://www.optexchina.com
Unit: mm (inch)
Unit: mm (inch)