Table of Contents
Advertisement
Others
- Specifications
Model
Detection method
Detection area
Mounting height
Mounting type
Sensitivity
Detection speed
LED indicator
Alarm cycle
Battery saving timer
Alarm output
Tamper switch
Warm-up time
Power supply
Current
PIR sensitivity
Weight
Operating temperature
Operating humidity
Location
Dimensions
• Specifications and designs are subject to change without prior notice.
• These units are designed to detect an intruder and activate an alarm control panel.
Being only a part of a complete system, we cannot accept responsibility for any
damages or other consequences resulting from an intrusion.
AP-20NBR(C)
Passive infrared
< Ceiling mount >
6.0 m x 1.0 m (20' x 3'3")
at 4.5 m (14'9") height
2.5 m to 4.5 m
(8'2" to 14'9")
Recessed ceiling mount/ Wall mount/ 86-type box mount
2.0°C at 0.6 m/s (3.6°F at 2'/s)
0.3 to 3.0 m/s (1'/s to 9'10"/s)
Warm-up upon power on: blinking
Stand-by: off
Walk test: solid on
Alarm: off (for battery saving)
Approx. 2 s
120 s/ 5 s selectable
N.O./N.C., 3.6 V DC 10 mA max.
N.C. 28 V DC 100 mA max.
The contact opens once the casing is detached.
Approx. 60 s
2.7 to 3.6 V DC (CR123A battery)
3 V DC
Stand-by: 10цA, Max.: 4 mA
H/ M/ L
50 g (1.76 oz)
-20°C to +50°C (-4°F to +122°F)
< 95%
Indoors
ø52 x 35.5 mm (ø2.05 x 1.40 in.)
86 x 86 x 36.5 mm (3.39 x 3.39 x 1.44 in.)
9
< Wall mount >
6.0 m x 4.5 m (20' x 14'9")
at 1.5 m (4'11") height
1.5 m (4'11"): Horizontal
1.0 m (3'3"): Vertical
: without switch box mount
: with 86-type box mount
Advertisement
Table of Contents
