Camera Id Setting - Sanyo VCC-6975 Instruction Manual

USING THE MENU SCREEN

CAMERA ID setting

1
Press the SET button for about 3 seconds.
The MAIN MENU screen will be displayed.
2
Press the CURSOR (l, then d or c) button to change the CAMERA ID setting to
"ON", then press the SET button.
The CAMERA ID SETTING screen will be displayed.
3
Example: To set the camera ID to "BN1"
The characters which have been selected will be displayed in the CAMERA ID IS
"????????" section.
1
Press the CURSOR (c) button until "B" is flashing, then press the SET button.
2
Press the CURSOR (l or d) button until "N" is flashing, then press the SET button.
3
Press the CURSOR (l or c) button until "1" is flashing, then press the SET button.
Determining the start position for character input
Press the CURSOR (l) button until 2 is flashing, then press the CURSOR (d or c) button
until the 2 is pointing to the start position. Select the characters using the CURSOR buttons.
Changing the camera ID to a new ID
Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then
press the SET button.
15
English
SET
MAIN MENU
LANGUAGE
CAMERA ID
SYNC
CURSOR
SET
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-
CAMERA ID IS
CURSOR
SET
CAMERA ID IS
CURSOR
SET
CAMERA ID IS
CURSOR
SET
PRESET
CAMERA ID
SET p
ON p
INT
????????
BN1?????
????????
ON
OFF