Setting The Camera From The Computer - Sanyo VCC-N6584 - Network Camera Instruction Manual

Setting the Camera from the Computer

This camera is shipped with the standard setting values and you can start using the camera without
performing any settings. If necessary, make appropriate settings or adjustment according to your usage.
For details, refer to the electronic manual contained in the supplied CD-ROM.
• If you have trouble adjusting the camera, consult your dealer or an Authorized Sanyo Service Center.
1
Displays the menu setting window (MENU button).
2
Displays the respective menu setting window (menu buttons).
3
Returns to the live image window (BACK button).
(Operation panel)
2
1
Camera title
The setting for "TITLE" in NETWORK SETTINGS will be displayed here.
The initial setting is "Network Camera".
Date and time
The date and time set in CLOCK SETTINGS will be displayed here.
Capture button
When you click this button, a still image is displayed in a separate window.
The images in the live image window will continue to be displayed even while the still image is being
displayed.
Remote alarm button
You can click the button at the top-right of the screen to output an alarm signal.
3
14
(Menu setting window)