Bagc Setting; Cgamma Setting - Sanyo VCC-6975 Instruction Manual

USING THE MENU SCREEN
B AGC setting
1
Press the CURSOR (l, then d or c) button to change the AGC setting to ON or
OFF (the setting will flash).
2
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
Note: If the item AGC is set to OFF when the SENSE UP item is set to ON, the item AGC
setting will be forced to ON.
GAMMA setting
C
1
Press the CURSOR (l, then d or c) button to change the GAMMA setting to ON or
OFF (the setting will flash).
ON: 0, 45
OFF: 1
2
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
OPTION/AGC, GAMMA
CURSOR
SET
OPTION MENU
APERTURE
AGC
CURSOR
SET
MENU
MENU
CURSOR
SET
OPTION MENU
APERTURE
AGC
GAMMA
CURSOR
SET
MENU
MENU
ON p
ON
BACK
END
ON p
ON
ON
BACK
END
50
English