Table of Contents
Advertisement
USING THE MENU SCREEN
6
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
Note:
•
If not using a camera to input the sync signal, use a sync signal generator, and input the
VBS signal from the sync signal generator to the external input. Settings such as INT in
the SYNC item will change automatically to VBS.
•
When adjusting the horizontal sync phase, you must use an oscilloscope with a dual trace
function.
CURSOR
SET
MENU
MENU
SYNC/VBS
BACK
END
20
English
Advertisement
Table of Contents
