C Manual White Balance Setting (Mwb) - Sanyo VCC-6975 Instruction Manual

USING THE MENU SCREEN
C Manual white balance setting (MWB)
1
Press the CURSOR (l, then d or c) button to change the WHITE BALANCE setting
to "MWB" (the setting will flash), then press the SET button.
The ADJUSTMENT FOR MWB screen will be displayed.
2
Press the CURSOR (l, then d or c) button to adjust the tint for the red (R) and
blue (B) colors.
A setting towards the right will make the tint (Red or Blue) stronger.
Returning to the default setting
Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then
press the SET button.
3
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
31
English
WHITE BALANCE/MWB
CURSOR
SET
MAIN MENU
LANGUAGE
CAMERA ID
SYNC
IRIS
WHITE BALANCE
ADJUSTMENT FOR MWB
[OFFSET]
R í--ú---z------ü 64
B í--ú---z------ü 64
CURSOR
SET
MENU
MENU
SET p
OFF
INT
AI p
MWB p
BACK
END