Registering A Surveillance Location (Preset Position); Determining The Surveillance Position (Position); Specifying The Camera Id And Title - Sanyo VCC-9700P Instruction Manual

Pan and Tilt Settings (PAN/TILT)
A Registering a surveillance location (PRESET POSITION)
When registering the surveillance location as preset position,
you can change orientation of the camera by selecting the
preset number.
PAN/TILT SETTING
PRESET POSITION
PROPORTIONAL
FREEZE
SET NORTH
TILT LIMIT
b Determining the surveillance position
(POSITION)
When determining the surveillance location, set the setting for the
auto flip function in the OPTION screen to "OFF", If this function is set
to "ON", the surveillance location may deviate from your setting. If the
surveillance location deviates, you are required to determine the
location again.
1
Use the joystick lever (xy) to select [PRESET
POSITION] – "SET y", and press the [ENTER]
button.
The preset map screen appears.
PRESET NO.SELECT
1:A 11:-
2:- 12:-
3:- 13:-
4:- 14:-
5:- 15:-
6:- 16:-
7:- 17:-
8:- 18:-
9:- 19:-
10:- 20:-
MENU
To select a preset number to register the camera's orientation:
• Use the joystick lever (xy or vw) to move the cursor to a preset
number used for registration.
• Available preset numbers are 1 to 255.
• Preset numbers can be displayed up to 40 in one page. Moving
the cursor to the leftmost or rightmost of the screen and
continuing to press the joystick lever to the left or right changes
the screen to the previous or next page.
• Pressing to the right: Displays next page.
• Pressing to the left: Displays previous page.
2
Use the joystick lever (xy) to select a preset
number to register the camera's orientation, and
press the [ENTER] button.
The preset setting screen appears.
PRESET NO.001
POSITION
TITLE
CAMERA VIEW
HOLD
SEQUENCE
GROUP
PAUSE TIME
• The preset number 1 is used as home position and cannot be
deleted. Initial setting is registered with preset number 0.
When resetting the camera, the setting registered with the
preset number 0 is also used for the preset number 1.
• The preset number 0 is not available for user-defined settings.
SET y
ON
OFF
OFF
6
21:- 31:-
22:- 32:-
23:- 33:-
24:- 34:-
25:- 35:-
26:- 36:-
27:- 37:-
28:- 38:-
29:- 39:-
30:- 40:-
BACK
SET y
OFF y
OFF y
OFF
A
5S
3
Use the joystick lever (xy) to select [POSITION] –
"SET y", and press the [ENTER] button.
The screen for determining the surveillance location appears.
PRESET NO.001 PRESET NO.001 PRESET NO.001
4
Use the joystick lever to determine the surveillance
location, and press the [ENTER] button.
This sets the surveillance location and displays the preset
setting screen again.
b Specifying the camera ID and title
When you connect multiple cameras to the surveillance system,
specify the camera ID for identifying individual cameras. You also can
set a specific title to preset position for easier management.
1
Use the joystick lever (xy) to select [PRESET
POSITION] – "SET y", and press the [ENTER]
button.
The preset map screen appears.
2
Use the joystick lever (xy) to select a preset
number to specify the ID or title, and press the
[ENTER] button.
The preset setting screen appears.
PRESET NO.001
POSITION
TITLE
CAMERA VIEW
HOLD
SEQUENCE
GROUP
PAUSE TIME
3
Use the joystick lever (xy) to select [TITLE], use the
lever (vw) to select "ON y", and press the [ENTER]
button.
Available settings:
• OFF: Does not specify the camera ID and title.
• ON: Specifies the camera ID and title.
(The TITLE SETTING screen appears.)
TITLE SETTING
POSITION
PRESET NO.
TITLE INPUT
SET y
SET y
OFF y
OFF y
OFF
A
5S
A
H y
OFF
SET y
B
C
26