Sanyo VCC-6975 Instruction Manual page 30

USING THE MENU SCREEN
4
When all masks have been applied, press the CURSOR (l) button to move the mask
cursor to the bottom edge of the screen, and continue pressing the CURSOR button
for about 3 seconds.
Returning to the default setting
Press the CURSOR (l, then d or c) button to change the PRESET setting to ON, then
press the SET button.
5
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen. Then
press the CURSOR (d or c) button to change BACK to END, and press the SET button.
To return to the previous screen, select BACK then press the SET button.
29
English
WHITE BALANCE/ATW•MASKING
CURSOR
SET
MENU
MENU
BACK
END