Table of Contents
Advertisement
CONNECTIONS
Coaxial cable type and maximum length
•
Cable type RG-59U (3C-2V), 250 m maximum.
•
Cable type RG-6U (5C-2V), 500 m maximum.
•
Cable type RG-11U (7C-2V), 600 m maximum.
CAUTION:
•
The RG-59U type cable should not be run through electrical
conduits or through the air.
•
Use CCTV/Video-grade coaxial cable.
About the Alarm output terminal
Connect this unit to a VCR or a multiplexer.
Alarm output
A: Alarm signal output
C: Common
CAUTION:
•
The digital processing of the settings may disturb the image for
a few seconds after the camera is turned on.
•
While the menus are being set, noise sent on the lines by
peripheral devices may cause the settings to change. In such a
case, turn the power off then on again.
5 V
About 500 msec.
Alarm active
Camera control unit connections
This camera main MENU can be set remotely using a camera control
unit (VAC-60, sold separately) connected between the camera and its
peripheral devices (such as a multiplexer, a timelapse VCR, a monitor
TV, etc.).
For detailed information, please refer to the camera control unit
instructions.
NOTE: When finished using the camera control unit, first turn it off,
then disconnect the connecting cables.
Monitor
CAMERA IN
terminal
VIDEO OUT
VAC-60
terminal
CAMERA IN
terminal
Timelapse VCR
10
English
Advertisement
Table of Contents
