Sub-Zero ICBBI-36R Design Manual
  1. Manuals
  2. Brands
  3. Sub-Zero Manuals
  4. Refrigerator
  5. ICBBI-36R
  6. Design manual
Sub-Zero ICBBI-36R Design Manual

Sub-Zero ICBBI-36R Design Manual

Hide thumbs Also See for ICBBI-36R:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction and Installation Manual, Installation Manual
INTERNATIONAL DESIGN GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICBBI-36R and is the answer not in the manual?

Questions and answers

Related Manuals for Sub-Zero ICBBI-36R

Summary of Contents for Sub-Zero ICBBI-36R

  • Page 1 INTERNATIONAL DESIGN GUIDE...

  • Page 2: Table Of Contents

    Contents Built-In Refrigeration Features and specifications are subject to change at any time without notice. PRO 48 Refrigeration Throughout this guide, dimensions may IMPORTANT NOTE: Integrated Refrigeration vary by ± 3 mm. Wine Storage Sub-Zero Warranty...

  • Page 3: Built-In Refrigeration

    BUILT-IN REFRIGERATION Built-In Refrigeration For the built-in line, Sub-Zero designers and engineers took • Dual refrigeration; two compressors preserve food’s a fresh look at everything, inside and out. Exterior refine- goodness in two sealed compartments. ments include redesigned grilles and lower-profile hinges.
  • Page 4 HEIGHT DIMENSIONS ± 13 mm 102 mm 102 mm 308 mm 359 mm 60 mm 60 mm Model ICBBI-36R and ICBBI-36F. Model ICBBI-30U. Overall dimensions are based on stainless steel models. For flush inset applications, add 13 mm to door clearance dimensions. English...
  • Page 5 BUILT-IN REFRIGERATION Overall Dimensions OVER-AND-UNDER 914 mm 665 mm 914 mm 665 mm 2134 2134 1289 1289 606 mm 606 mm HEIGHT DIMENSIONS ± 13 mm HEIGHT DIMENSIONS ± 13 mm 102 mm 102 mm 359 mm 60 mm 60 mm Model ICBBI-36U.
  • Page 6 BUILT-IN REFRIGERATION Overall Dimensions SIDE-BY-SIDE 914 mm 665 mm 1067 mm 665 mm 2134 2134 1873 1873 606 mm 606 mm HEIGHT DIMENSIONS ± 13 mm HEIGHT DIMENSIONS ± 13 mm 102 mm 102 mm 60 mm 60 mm Model ICBBI-36S. Model ICBBI-42S and ICBBI-42SD.
  • Page 7 BUILT-IN REFRIGERATION Overall Dimensions Specifications SIDE-BY-SIDE BUILT-IN MODELS INTERIOR CAPACITY 1219 mm 665 mm ALL REFRIGERATOR / ALL FREEZER R (L) F (L) ICBBI-36R ICBBI-36F OVER-AND-UNDER R (L) F (L) ICBBI-30U ICBBI-36U ICBBI-36UFD 2134 SIDE-BY-SIDE R (L) F (L) ICBBI-36S...

  • Page 8: Icbbi-36R

    OPENING WIDTH must be decreased by 22 mm. If a 2235 mm grille height is MODEL specified, the opening height must be increased by 102 mm. ICBBI-36R, ICBBI-36F 902 mm ICBBI-30U 749 mm If two units are installed side by side, refer to page 10 for...
  • Page 9 Dimensions assume a 19 mm panel thickness. FLUSH INSET WIDTH MODEL If a 2108 mm grille height is specified, the flush inset height ICBBI-36R, ICBBI-36F 965 mm must be decreased by 22 mm. If a 2235 mm grille height is ICBBI-30U...
  • Page 10 BUILT-IN REFRIGERATION Opening Dimensions DUAL STANDARD INSTALLATION 610 mm OPENING DEPTH TOP VIEW 2127 mm OPENING OPENING WIDTH HEIGHT SIDE VIEW FRONT VIEW NOTE: Shaded line represents profile of unit. A dual installation kit will be required for this installation. OPENING WIDTH MODELS Two 762 mm Models...
  • Page 11 BUILT-IN REFRIGERATION Opening Dimensions DUAL FLUSH INSET INSTALLATION 665 mm FLUSH INSET DEPTH FINISHED CLEATS* TOP VIEW 6 mm 32 mm 2134 mm FLUSH FLUSH INSET WIDTH INSET HEIGHT 102 mm TYPICAL SIDE VIEW FRONT VIEW *76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 19 mm panel.
  • Page 12 BUILT-IN REFRIGERATION Electrical Plumbing International models from the factory designed without a For built-in models with an automatic ice maker, the water transformer require a 220-240 V AC, 50/60 Hz electrical supply line should be located within the shaded area shown supply, fused at the correct rating for the unit.
  • Page 13 PANEL MOUNTING KIT panels must be provided. Handle hardware must also be A Sub-Zero custom panel mounting kit eliminates the need provided for overlay and flush inset applications. Refer to for a backer and spacer panel and is avail able through an panel requirements below and the charts on pages 15–18...
  • Page 14 BUILT-IN REFRIGERATION Custom Panels FLUSH INSET PANELS ICE AND WATER DISPENSER The flush inset application is an overlay model with flush For models ICBBI-42SD and BI-48SD, the refrigerator door inset panels. It is not a separate model. panel must include a cut-out to accommodate the external dispenser.

  • Page 15: Icbbi-30U Icbbi-36U Icbbi-36Ufd

    BUILT-IN REFRIGERATION Overlay Panel Dimensions ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U ICBBI-36UFD MODEL ICBBI-36R, ICBBI-36F MODEL ICBBI-36U REFRIGERATOR / FREEZER REFRIGERATOR Overlay Panel 914 mm 1772 mm Overlay Panel 914 mm 1273 mm Spacer Panel 892 mm 1751 mm Spacer Panel...

  • Page 16: Icbbi-36S

    BUILT-IN REFRIGERATION Overlay Panel Dimensions ICBBI-36S / ICBBI-42S ICBBI-42SD / ICBBI-48SD ICBBI-48S / ICBBI-48SID MODEL ICBBI-36S MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD REFRIGERATOR REFRIGERATOR Overlay Panel 510 mm 1772 mm Overlay Panel 730 mm 1772 mm Spacer Panel 487 mm 1751 mm Spacer Panel 708 mm 1751 mm...
  • Page 17 BUILT-IN REFRIGERATION Flush Inset Panel Dimensions ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U ICBBI-36UFD MODEL ICBBI-36R, ICBBI-36F MODEL ICBBI-36U REFRIGERATOR / FREEZER REFRIGERATOR Flush Inset Panel 940 mm 1772 mm Flush Inset Panel 940 mm 1273 mm Spacer Panel 892 mm...
  • Page 18 BUILT-IN REFRIGERATION Flush Inset Panel Dimensions ICBBI-36S / ICBBI-42S ICBBI-42SD / ICBBI-48SD ICBBI-48S / ICBBI-48SID MODEL ICBBI-36S MODEL ICBBI-48S, ICBBI-48SID, ICBBI-48SD REFRIGERATOR REFRIGERATOR Flush Inset Panel 522 mm 1772 mm Flush Inset Panel 743 mm 1772 mm Spacer Panel 487 mm 1751 mm Spacer Panel 708 mm...

  • Page 19: Flush Inset Panels

    BUILT-IN REFRIGERATION TOP VIEW TOP VIEW TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE DOOR DOOR DOOR DOOR BACKER CABINETRY BACKER CABINETRY SPACER SPACER TOP VIEW TOP VIEW TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE FLUSH INSET PANEL FLUSH INSET PANEL...
  • Page 20 Refer to the illustrations below. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. WITHOUT FILLER STRIP FILLER STRIP Opposite hinges.
  • Page 21 BUILT-IN REFRIGERATION Dual Flush Inset Panel Dimensions ICBBI-36R / ICBBI-36F ICBBI-30U / ICBBI-36U MODEL ICBBI-36R, ICBBI-36F MODEL ICBBI-36U REFRIGERATOR / FREEZER REFRIGERATOR Flush Inset Panel 927 mm 1772 mm Flush Inset Panel 927 mm 1273 mm Spacer Panel 892 mm...
  • Page 22 BUILT-IN REFRIGERATION TOP VIEW TOP VIEW TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE DOOR DOOR DOOR DOOR BACKER CABINETRY BACKER CABINETRY SPACER SPACER TOP VIEW TOP VIEW TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE FLUSH INSET PANEL FLUSH INSET PANEL...
  • Page 23 BUILT-IN REFRIGERATION Dual Installation DUAL WIDE GRILLE DUAL WIDE GRILLE—FLUSH INSET TWO 762 mm MODELS A dual wide grille spans the entire width of both units in a Flush Inset Panel 1556 mm 235 mm dual installation and is a part of a dual installation kit. Spacer Panel 1508 mm 211 mm...
  • Page 24 When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel HANDLE LENGTH side panels are available through an authorized Sub-Zero BUILT-IN TUBULAR Full Door 1622 mm 1147 mm dealer.
  • Page 25 BUILT-IN REFRIGERATION Overlay and Flush Inset Panels FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 16 mm thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 32 mm...
  • Page 26 BUILT-IN REFRIGERATION Overlay Application FULL-SCALE TEMPLATE 606 mm OVERALL WIDTH OF UNIT TO REAR OF UNIT 25 mm THICK PANEL 19 mm THICK OVERLAY PANEL (TYPICAL) 6 mm BACKER PANEL 25 mm SCALE 90° door opening (top view). English...
  • Page 27 BUILT-IN REFRIGERATION Flush Inset Application FULL-SCALE TEMPLATE 610 mm For panels thicker than 19 TO BACK WALL mm, a 90° door stop may be required to prevent interfer- ence with adjacent cabinets. 32 mm 56 mm ASSUMES 19 mm FLUSH INSET PANEL THICKNESS 25 mm...
  • Page 28 BUILT-IN REFRIGERATION FILLER STRIP 32 mm APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR DOOR AND HANDLE CLOSED Dual Standard Installation DOOR OPEN 110° FULL-SCALE TEMPLATE Typical overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90°...
  • Page 29 BUILT-IN REFRIGERATION FILLER STRIP 38 mm 13 mm 19 mm PROFILE OF FLUSH INSET PANEL DOOR AND TUBULAR HANDLE CLOSED Dual Flush Inset Installation DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90°...

  • Page 30: Pro 48 Refrigeration

    PRO 48 REFRIGERATION PRO 48 Refrigeration Freshness finds unmistakable expression in the Sub-Zero KEY FEATURES PRO 48. A 363 kg monument to food preservation—equal • Can be used freestanding or installed as a standard or parts sculpted metal design statement and culinary secret flush built-in application.
  • Page 31 PRO 48 REFRIGERATION Overall Dimensions PRO 48 MODELS 657 mm 1219 mm 2134 1070 102 mm HEIGHT DIMENSIONS ± 13 mm 767 mm 368 mm SPECIFICATIONS INTERIOR CAPACITY R (L) F (L) ICB648PRO, ICB648PROG 60 mm Models ICB648PRO and ICB648PROG. subzero.com...
  • Page 32 PRO 48 REFRIGERATION Opening Dimensions STANDARD AND FLUSH INSTALLATION OPENING DEPTH TOP VIEW OPENING OPENING WIDTH HEIGHT SIDE VIEW FRONT VIEW For standard built-in installations, the face frame of the unit OPENING DIMENSIONS will extend 51 mm beyond cabinetry. For flush installations, INSTALLATION the front of the face frame will be flush with surrounding Standard...
  • Page 33 PRO 48 REFRIGERATION Electrical Plumbing International models from the factory designed without a The water supply line should be located within the shaded transformer require a 220-240 V AC, 50/60 Hz electrical area shown in the illustration below. The water supply line supply, fused at the correct rating for the unit.
  • Page 34 PRO 48 REFRIGERATION Standard Handles Refer to the chart below for standard handle lengths for PRO 48 models. HANDLE LENGTH PRO 48 TUBULAR Door 703 mm Refrigerator Drawer 506 mm Freezer Drawer 294 mm English...

  • Page 35: Integrated Refrigeration

    INTEGRATED REFRIGERATION Integrated Refrigeration With custom front panels and hardware, Sub-Zero invented KEY FEATURES integrated columns, tall and drawer models that disappear • Custom front panels and hardware allow for infinite into the decor. Integrated units fit flush with other cabinets, design options.
  • Page 36 INTEGRATED REFRIGERATION Specifications Overall Dimensions COLUMN INTERIOR CAPACITY COLUMN R (L) F (L) ICBIC-18FI 610 mm ICBIC-24R 114 mm ICBIC-24FI ICBIC-30RID ICBIC-30FI ICBIC-36RID TALL R (L) F (L) 2134 1765 ICBIT-30RID ICBIT-30CIID ICBIT-36CIID DRAWER R (L) F (L) ICBID-30RP ICBID-30CI ICBID-36CI Overall dimensions do not include IMPORTANT NOTE:...
  • Page 37 INTEGRATED REFRIGERATION Overall Dimensions TALL DRAWER 610 mm 610 mm 6 mm 114 mm 10 mm 2134 1140 92 mm *864 mm 889 mm MIN TO 10 mm 10 mm 92 mm *2121 mm 2146 mm MIN TO DRAWER MODEL 45 mm ICBID-30RP, ICBID-30CI 762 mm...
  • Page 38 If a dual installation kit is not specified, a minimum 51 mm filler strip is required between units. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. SIDE VIEW FRONT VIEW NOTE: 89 mm finished returns will be visible and should be finished to match cabinetry.
  • Page 39 INTEGRATED REFRIGERATION Electrical Plumbing The electrical supply must be located within the shaded The water supply line should be located within the shaded area shown in the illustration and chart below. A separate area shown in the illustration below. The water supply line circuit, servicing only this appliance is required.
  • Page 40 Refer to the illustration for panel heights and the Sub-Zero dealer. chart below for panel widths. PANEL REQUIREMENTS PANEL WIDTH...
  • Page 41 Refer to the illustration below. dimensions in the illustration below. Toe kick heights from 51 mm to 98 mm require a reduced toe kick accessory available through an authorized Sub-Zero dealer. A DECORATIVE VALANCE CANNOT EXTEND 3 mm...
  • Page 42 INTEGRATED REFRIGERATION Standard Handles Optional stainless steel tubular and pro handles are avail- able through an authorized Sub-Zero dealer. Refer to the chart below for standard handle lengths for integrated models. HANDLE LENGTH INTEGRATED TUBULAR Column Door 1273 mm 1229 mm...
  • Page 43 INTEGRATED REFRIGERATION Maximum Door Opening FULL-SCALE TEMPLATE As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by utilizing the 90° door stop. 19 mm PANEL DOOR OPEN MAXIMUM 105° 3 mm REVEAL POTENTIAL DOOR CLOSED...

  • Page 44: Wine Storage

    WINE STORAGE Wine Storage Wine finds a well-deserved place of honor in a Sub-Zero KEY FEATURES wine storage unit. Every detail is designed to ensure better • Integrated, overlay, flush inset and stainless steel design wine preservation. Cherrywood-faced racks, soft lighting, options.
  • Page 45 WINE STORAGE Overall Dimensions MODEL ICB424G MODEL ICB424FSG 606 mm 610 mm 616 mm 625 mm 102 mm 102 mm 44 mm 44 mm Freestanding model ICB424FSG has a finished stainless SPECIFICATIONS steel exterior and handles. STORAGE CAPACITY BOTTLES (750 ML) ICB424G Overall dimensions are based on the stainless steel model.
  • Page 46 WINE STORAGE Opening Dimensions MODEL ICB424G 610 mm OPENING DEPTH TOP VIEW 876 mm OPENING OPENING WIDTH HEIGHT SIDE VIEW FRONT VIEW OPENING WIDTH MODEL ICB424G 610 mm English...

  • Page 47: Important Note

    WINE STORAGE Overall Dimensions COLUMN TALL 610 mm 610 mm 114 mm 114 mm 2134 1765 2134 1140 10 mm 10 mm 92 mm 92 mm *2121 mm 2146 mm *2121 mm 2146 mm MIN TO MIN TO 45 mm 45 mm COLUMN TALL...
  • Page 48 WINE STORAGE Specifications INTERIOR CAPACITY COLUMN BOTTLES (750 ML) ICBIW-18 ICBIW-24 ICBIW-30 TALL R (L) BOTTLES (750 ML) ICBIW-30R English...
  • Page 49 51 mm filler strip is required between units. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. SIDE VIEW FRONT VIEW NOTE: 89 mm finished returns will be visible and should be finished to match cabinetry.
  • Page 50 WINE STORAGE Overall Dimensions Opening Dimensions MODEL ICBWS-30 MODEL ICBWS-30 STANDARD INSTALLATION 762 mm 665 mm 610 mm OPENING DEPTH 2134 TOP VIEW 1873 2127 mm OPENING OPENING WIDTH HEIGHT HEIGHT DIMENSIONS ± 13 mm 606 mm 102 mm SIDE VIEW FRONT VIEW NOTE: Shaded line represents profile of unit.
  • Page 51 WINE STORAGE Opening Dimensions MODEL ICBWS-30 FLUSH INSET INSTALLATION 665 mm FLUSH INSET DEPTH FINISHED CLEATS* TOP VIEW 6 mm 32 mm 2134 mm FLUSH FLUSH INSET WIDTH INSET HEIGHT 102 mm TYPICAL SIDE VIEW FRONT VIEW *76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 19 mm panel.
  • Page 52 WINE STORAGE Opening Dimensions MODEL ICBWS-30 DUAL STANDARD INSTALLATION 610 mm OPENING DEPTH TOP VIEW 2127 mm OPENING OPENING WIDTH HEIGHT SIDE VIEW FRONT VIEW NOTE: Shaded line represents profile of unit. A dual installation kit will be required for this installation. OPENING WIDTH MODELS ICBWS-30 and 762 mm Built-In...
  • Page 53 WINE STORAGE Opening Dimensions MODEL ICBWS-30 DUAL FLUSH INSET INSTALLATION 665 mm FLUSH INSET DEPTH FINISHED CLEATS* TOP VIEW 6 mm 32 mm 2134 mm FLUSH FLUSH INSET WIDTH INSET HEIGHT 102 mm TYPICAL SIDE VIEW FRONT VIEW *76 mm typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 19 mm panel.
  • Page 54 WINE STORAGE Electrical The electrical supply must be located within the shaded ELECTRICAL SUPPLY LOCATION area shown in the illustration for your specific model. MODEL For integrated (ICBIW) models, also refer to the chart. A ICBIW-18 152 mm separate circuit, servicing only this appliance is required. A ICBIW-24 241 mm ICBIW-30, ICBIW 30R...
  • Page 55 Service may be required to install the door. Contact an PANEL THICKNESS ICB424G 16 mm authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels. Finish all sides of the custom panels. They may be visible OVERLAY PANEL DIMENSIONS when the door is open or through the window of glass door models.
  • Page 56 Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer. 2029 1254 The thickness of the custom panel can vary. A minimum 16 mm thick panel is required, but the thickness can be increased provided it does not exceed the weight limit.
  • Page 57 Refer to the illustration below. dimensions in the illustration below. Toe kick heights from 51 mm to 98 mm require a reduced toe kick accessory available through an authorized Sub-Zero dealer. For ques- tions regarding the installation, contact your authorized Sub-Zero dealer.
  • Page 58 WINE STORAGE Custom Panels—ICBWS-30 OVERLAY PANELS OVERLAY PANEL DIMENSIONS Overlay panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel. Refer to the illustrations below. PANEL REQUIREMENTS PANEL WEIGHT Door 34 kg Grille...
  • Page 59 WINE STORAGE Custom Panels—ICBWS-30 FLUSH INSET PANELS FLUSH INSET PANEL DIMENSIONS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 19 mm custom panel, a 3 mm spacer panel and a 6 mm backer panel.
  • Page 60 8 mm WINE STORAGE TOP VIEW TOP VIEW CABINETRY DOOR / DRAWER / GRILLE 13 mm GRILLE Custom Panels—ICBWS-30 DOOR DOOR BACKER CABINETRY FLUSH INSET PANEL OFFSETS GRILLE SPACER 13 mm TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE CABINETRY The illustrations provide panel offsets and reveals for model FLUSH INSET PANEL...
  • Page 61 Refer to the illustra- tions below. Dual installation kits are available through an authorized Sub-Zero dealer. For questions regarding the installation, contact your authorized Sub-Zero dealer. For dual standard installations, panel dimensions are the same as for single installations.
  • Page 62 WINE STORAGE TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR DOOR BACKER CABINETRY SPACER TOP VIEW TOP VIEW TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR / DRAWER / GRILLE FLUSH INSET PANEL Custom Panels—ICBWS-30 8 mm 8 mm 3 mm DOOR...
  • Page 63 Optional stainless steel tubular and pro handles are avail- SIDE PANEL able through an authorized Sub-Zero dealer. The custom side panel must be a minimum of 610 mm deep and 13 mm thick. Routing will be necessary for the side Refer to the chart below for standard handle lengths for panel to fit flush against the side of the unit.
  • Page 64 WINE STORAGE Wine Rack Wood Facing FULL-SCALE TEMPLATE WOOD FACING WIDTH MODEL WIDTH The natural cherrywood facing on wine storage racks can ICB424G, ICB424FSG 495 mm be stained and sealed, or replaced with wood more comple- ICBIW-18 295 mm mentary to surrounding cabinetry. Refer to the full-scale ICBIW-24 448 mm template below for profile dimensions of the wood facing...
  • Page 65 WINE STORAGE Door Clearance—ICB424G FULL-SCALE TEMPLATE To allow for a 145° door opening, the unit should extend a minimum of 6 mm beyond the front surface of adjacent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
  • Page 66 WINE STORAGE Overlay and Flush Inset Panels—ICBWS-30 FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 16 mm thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 32 mm...
  • Page 67 WINE STORAGE Overlay Application—ICBWS-30 FULL-SCALE TEMPLATE 606 mm OVERALL WIDTH OF UNIT TO REAR OF UNIT 25 mm THICK PANEL 19 mm THICK OVERLAY PANEL (TYPICAL) 6 mm BACKER PANEL 25 mm SCALE 90° door opening (top view). subzero.com...
  • Page 68 WINE STORAGE Flush Inset Application—ICBWS-30 FULL-SCALE TEMPLATE 610 mm For panels thicker than 19 TO BACK WALL mm, a 90° door stop may be required to prevent interfer- ence with adjacent cabinets. 32 mm 56 mm ASSUMES 19 mm FLUSH INSET PANEL THICKNESS 25 mm...
  • Page 69 WINE STORAGE FILLER STRIP 32 mm APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR DOOR AND HANDLE CLOSED Dual Standard Installation—ICBWS-30 DOOR OPEN 110° FULL-SCALE TEMPLATE Typical overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90°...
  • Page 70 WINE STORAGE FILLER STRIP 38 mm 13 mm 19 mm PROFILE OF FLUSH INSET PANEL DOOR AND TUBULAR HANDLE CLOSED Dual Flush Inset Installation—ICBWS-30 DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90°...
  • Page 71 FULL FIVE YEAR SEALED SYSTEM WARRANTY For five years from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connect- ing tubing that prove to be defective in materials or workmanship.
  • Page 72 SUB-ZERO, INC. P O BOX 44848 MADISON, WI 53744 USA WWW.SUBZERO.COM I S Z D G 3 / 2 0 1 5...

This manual is also suitable for:

Icbbi-36fIcbbi-30uIcbbi-36uIcbbi-36ufdIcbbi-36sIcbbi-42s ... Show all

Table of Contents