To Scan An Original Fed From The Radf Original Mode; Copy Density Recommended Value Mode Ten's Place One's Place Ten's Place One's Place Manual; Copy Density Recommended Value; Mode Ten's Place One's Place Ten's Place One's Place - Toshiba e-STUDIO 2500c Manual

(4) Adjust the background peak of range correction to lighten the copy image.
• Use steps (a) to (b) to adjust the background peak of range correction.
(a) Enter adjustment mode [05]. Change the values for codes [570/572] or [693/695] to set the background
peak of range correction to "fixed."
• The code to use varies according to the density option (auto or manual), original mode, (Text/Photo or
Text) and use of the RADF (MR-3018). Adjust the value for [05] code corresponding to the condition
for which you would like to improve the image quality and set "1 in the one's or the ten's place.
* Set value (Ex.: To set the background/text peak in the manual and auto copy density mode to "fixed")
1 1
One's place: Set the background/text peak in auto copy density mode to "fixed" — See the table
Ten's place: Set the background/text peak in manual copy density mode to "fixed" — See the
Value Background peak
1
2
3
4
To scan an original placed manually on the original glass
Original
mode
Text/Photo
Text
To scan an original fed from the RADF
Original
mode
Text/Photo
Text
below for further information.
table below for further information.
Text peak
Fixed Fixed
Varied Fixed
Fixed Varied
Varied Varied
Copy density
[05] code
mode
Manual
05-570
Auto
Manual
05-572
Auto
Copy density
[05] code
mode
Manual
05-693
Auto
Manual
05-695
Auto
2. Copier-specific Adjustments
Recommended value
Ten's place One's place Ten's place One's place
1 Current value
Current value 1
1 Current value
Current value 1
Recommended value
Ten's place One's place Ten's place One's place
1 Current value
Current value 1
1 Current value
Current value 1
e-STUDIO2500c/3500c/3510c
Default
2 2
2 2
Default
2 2
2 2
2.6