Toshiba e-STUDIO 2500c Manual page 179

PCL6 PS3 Mac * This adjustment will have an effect only on Black and white mode printing.
(4) Enter adjustment mode [05]. Change the values for codes [8210 to 8215] or [8252 to 8257] to adjust the
threshold values for "Pure Gray" and "Pure Black" (to adjust the area to print only using the K toner).
• Adjust the value for [05] code corresponding to the print option to be applied (Apply to, PDL, Item,
Subcode (Image quality type)).
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
* The effect with PureBlack/Gray selected will be invalid, if "Photo" is selected from among the "Image
Quality Type" options and CIE-Based RGB/CMYK data are printed. The effect will be invalid, if Device
CMYK data are printed, regardless of which "Image Quality Type" option is selected.
The effect will be valid, only if "General," "Presentation" or "Line Art" is selected and CIE Based
RGB/CMYK data or Device RGB data are printed.
Apply to PDL
PureBlack
PCL6
PureGray
Text
Device RGB
PureBlack/Gray
PS3
CIE-Based
PureBlack/Gray
PureBlack
PCL6
PureGray
Graphic
Device RGB
PureBlack/Gray
PS3
CIE-Based
PureBlack/Gray
PureBlack
PCL6
PureGray
Image
Device RGB
PureBlack/Gray
PS3
CIE-Based
PureBlack/Gray
* The values in the parentheses in the acceptable range column indicate valid values, which provide the
effect. "*1" is a valid value, if "General," "Photograph" or "Presentation" is selected from among the
"Image Quality Type" options. "*2" is a valid value, if "Line Art" " is selected.
* The subcode varies according to the Image quality type where the adjustment is performed. Refer to the
table below and set the subcode for the Image quality type to adjust.
Subcode
0
1
2
3
Item [05] code Subcode
05-8210 0/1/2/3
05-8213 0/1/2/3
05-8252 0/1/2/3
05-8255 0/1/2/3
05-8211 0/1/2/3
05-8214 0/1/2/3
05-8254 0/1/2/3
05-8257 0/1/2/3
05-8212 0/1/2/3
05-8215 0/1/2/3
05-8253 0/1/2/3
05-8256 0/1/2/3
Image Quality Type
General
Photographic
Presentation
Line Art
3. Printer-specific Adjustments
Recommended value
Set a value smaller than the default to
decrease the area to print only using
the K toner.
Set a value larger than the default to
increase the area to print only using the
K toner.
e-STUDIO2500c/3500c/3510c
3.
Acceptable
Default
value range
1 to 15 8
113 to 143
128
(121 to 143)
1 to 15 1/1/1/8
113 to 143
(128 to 143) *1 128
(121 to 143) *2
1 to 15 1/1/1/8
113 to 143
(128 to 143) *1 128
(121 to 143) *2
3.21 3.21