Toshiba e-STUDIO 2500c Manual page 73

(1) Press the [BASIC] button on the Control Panel and select the original mode option, as follows:
• To copy in the Full color or the Auto color mode: Select the Printed image mode option.
• To copy in the Black mode:
* When copying a photo image in the Full color mode, select the Photo mode option from among the
original mode options.
* To have the above original mode options selected by default, refer to procedure (1) in 2.8 To Eliminate
Moiré.
After changing the default original mode option, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(2) Press the [IMAGE] button on the Control Panel. Press the [SHARPNESS] button.
Press the [SOFT] button to soften the copy image.
After softening the copy image, copy and check the copy image quality.
With the sharpness intensity set to the minimum (softest), if further image quality adjustments are still
necessary, the service technician must use the next procedure.
(3) Press the [BASIC] button on the Control Panel. Select "Custom" from among the original mode options in
the Full color mode.
* If the [CUSTOM] button is not displayed in the original mode option in the Full color mode, enter setting
mode [08] and set "1" for code [506] to enable the "Custom" mode option in the Full color mode.
* To have "Custom" selected from among the original mode options by default, refer to procedure (1) in 2.8
To Eliminate Moiré.
After changing the default original mode option, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
2. Copier-specific Adjustments 2. Copier-specific Adjustments
Select the Photo mode option.
2.
e-STUDIO2500c/3500c/3510c
2.10 2.10 2.8