Toshiba e-STUDIO 2500c Manual page 108

3. Printer-specific Adjustments
PCL6 PS3
(3) Enter adjustment mode [05]. Change the values for codes [8050 to 8065] to adjust the color density.
• Adjust the value for [05] code corresponding to the print option to be applied (PDL and Halftone).
Ex.: • When printing on Windows is performed with the following options selected: PCL6, Image Quality
Type = General, Halftone = Auto
> Text area
> Graphic and image area
• When printing on Macintosh is performed with the following option selected: Image Type =
Photograph, Halftone = Smooth
> Change the values for Y: 05-8050, M: 05-8051, C: 05-8052 and K: 05-8053.
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Color to
adjust
Y
(Yellow)
M
(Magenta)
C
(Cyan)
K
(Black)
* Set the value in increments of approximately 20, while checking the printouts until the optimum value is
obtained.
3.3
e-STUDIO2500c/3500c/3510c
* This adjustment will have an effect only on Auto or Color mode printing.
Mac
Change the values for Y: 05-8062, M: 05-8063, C: 05-0864 and K: 05-8065.
Change the values for Y: 05-8058, M: 05-8059, C: 05-8060 and K: 05-8061.
PDL Halftone [05] code Subcode Recommended value
Smooth 05-8058
PCL5c
Detail 05-8062
Smooth 05-8050
PS3
Detail 05-8054
Smooth 05-8059
PCL5c
Detail 05-8063
Smooth 05-8051
PS3
Detail 05-8055
Smooth 05-8060
PCL5c
Detail 05-8064
Smooth 05-8052
PS3
Detail 05-8056
Smooth 05-8061
PCL5c
Detail 05-8065
Smooth 05-8053
PS3
Detail 05-8057
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
Set a value larger than 128
0/1/2
to increase the density.
0/1/2
0/1/2
Set a value smaller than 128
0/1/2
to decrease the density.
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
Acceptable
Default
value range
0 to 255 128