Toshiba e-STUDIO 2500c Manual page 141

<Hint> The following options are recommended for users who frequently perform the adjustment using
procedure (1).
Performing these options allows users to easily select the same conditions as the ones adjusted
in procedure (1).
• Perform these options by registering the Custom Color Settings where "-1" is set for the
sharpness option (only on Windows).
* For further information regarding how to register the Custom Color Settings, refer to
3.23 To Register the Image Quality Adjusted Corresponding to a Preference.
• Set "1" for code 05-8120.
* Setting "-1" for the sharpness option disables the sharpness adjustment by default.
Setting "1" for code 05-8120 switches the position where the sharpness adjustment is
disabled from "-1" to"0." Therefore, the sharpness adjustment is always disabled
without the sharpness option changed (with "0" set).
However, this adjustment changes the values set in the MFP. Therefore, it will affect
every user who uses the printer by connecting it to the MFP. After the adjustment, the
values changed will be applied to all printouts for the "Sharpness" option. Carefully
perform the adjustment, being aware that the image quality of all future printouts will
be changed, when printing out originals other than the one that is used for the
adjustment.
After performing these options, print and check the print image quality.
If further image quality adjustments are still necessary, return the value for the sharpness option to "0" and
use the next procedure according to the image quality problem you have.
• If the photo image contrast is insufficient:
• If smudges (toner scattering) are not eliminated:
3. Printer-specific Adjustments
Go to procedure (2).
Go to procedure (3).
e-STUDIO2500c/3500c/3510c
3.13