Toshiba e-STUDIO 2500c Manual page 143

PCL6 PS3 Mac
(3) If smudges (toner scattering) are not eliminated after the adjustment in procedure (1), enter adjustment mode
[05]. Decrease the values for codes [8076 to 8078], [8080 to 8088] or [1092 to 1096] to reduce the amount
of toner used.
• Adjust the value for [05] code corresponding to the print option to be applied (Paper type, Image quality
type, Halftone, and PDL).
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Paper Image quality
type type
General/Photograph/
Presentation
Special 1
Line Art
General/Photograph/
Presentation
Special 2
Line Art
General/Photograph/
Presentation
Recycled
paper
Line Art
General/Photograph/
Presentation
Plain
paper
Line Art
General/Photograph/
Presentation
Thick 1
Line Art
General/Photograph/
Presentation
Thick 2
Line Art
General/Photograph/
Presentation
Thick 3
Line Art
General/Photograph/
Presentation
OHP
Line Art
* Set the value in increments of approximately 30, while checking the printouts until the optimum value is
obtained.
* This adjustment will have an effect only on Auto or Color mode printing.
Halftone [05] code
Auto/Smooth 05-8076
Detail 05-8085
Smooth 05-8076
Auto/Detail 05-8085
Auto/Smooth 05-8077
Detail 05-8086
Smooth 05-8077
Auto/Detail 05-8086
Auto/Smooth 05-8078
Detail 05-8087
Smooth 05-8078
Auto/Detail 05-8087
Auto/Smooth 05-8080
Detail 05-1092
Smooth 05-8080
Auto/Detail 05-1092
Auto/Smooth 05-8081
Detail 05-1093
Smooth 05-8081
Auto/Detail 05-1093
Auto/Smooth 05-8082
Detail 05-1094
Smooth 05-8082
Auto/Detail 05-1094
Auto/Smooth 05-8083
Detail 05-1095
Smooth 05-8083
Auto/Detail 05-1095
Auto/Smooth 05-8084
Detail 05-1096
Smooth 05-8084
Auto/Detail 05-1096
3. Printer-specific Adjustments
Subcode Recommended
(PDL) value
Set a value
PCL6: 0
smaller than
PS3: 1
the default.
e-STUDIO2500c/3500c/3510c
Acceptable
Default
value range
113
113
128
128
0 to 255
113
113
113
128
3.13