Download  Print this page

Disconnect The Deactivation Function; Buzzer - Siemens Codoor CD3500 Installation & User Manual

Hide thumbs

Advertisement

CD3500 & CD4000 Installation and User manual

Disconnect the deactivation function

Proceed like this:
1.
Press , and then enter the 6-digit
programming code. Finish by
pressing .
2.
The red LED will flash slowly, accompanied by
simultaneous sounding of the buzzer.
3.
Enter  68 . The red LED will flash faster.
4.
Enter  0 . The green LED will come on.
5.
Exit programming mode by entering  00 . The
buzzer sounds a rising tone to confirm.
If you want to reconnect the deactivation function, repeat steps 1 to
5, but enter 1 instead of 0 in step 4.

Buzzer

In operating mode, Codoor's buzzer may be programmed to sound
as each key is pressed, or to remain silent. At delivery, the buzzer is
programmed to sound. However, if silent
operation is required, proceed as follows:
Press , then enter the 6-digit
1.
programming code. Finish by
pressing .
2.
The red LED will flash slowly, accompanied by simultaneous
sounding of the buzzer.
3.
Enter  65 . The red LED will flash faster.
4.
Enter  0 . The green LED will come on.
5.
Exit programming mode by entering  00 . The
buzzer sounds a rising tone to confirm.
If you wish to reactivate the buzzer, follow steps 1 to
5, but press 1 instead of 0 in step 4.
13
6
6
8
8
0
0
0
0
0
0
6
6
5
5
0
0
0
0
0
0

Advertisement

Chapters

   Also See for Siemens Codoor CD3500

   Related Manuals for Siemens Codoor CD3500

   Related Content for Siemens Codoor CD3500

This manual also for:

Codoor cd4000

Comments to this Manuals

Symbols: 0
Latest comments: