Download  Print this page

Advertisement

1
CD3500 & CD4000 Installation and User manual

Erase memory

In cases where the Codoor is moved to another door (with new
users), you should be sure that no old codes remains. The best way
is to erase the memory. Proceed as follows:
1.
Remove Codoor from the door.
2.
Press and hold the reset button on the rear of Codoor
and  -button simultaneously - until the green LED
lit.
3.
Release both buttons simultaneously.
4.
Press the reset button once again for 2 seconds.
5.
As a confirmation, a rising tone sounds from the buzzer.
+
+
R
R
R R

Advertisement

Chapters

   Also See for Siemens Codoor CD3500

   Related Manuals for Siemens Codoor CD3500

   Related Content for Siemens Codoor CD3500

This manual also for:

Codoor cd4000

Comments to this Manuals

Symbols: 0
Latest comments: