Table of Contents
Advertisement
Data File Transfer
PhoneTools' file transfer feature lets you automatically send and receive data files
using the Kermit, Xmodem, Ymodem, or Zmodem protocol at the maximum speed
supported by the modems at both ends.
Sending a Data File Automatically
1. From PhoneTools' main window, click
box.
2. Type the name and number in the Recipients section, or extract them from the
Phone Book by clicking
3. In the File to send section, click the Browse button
Several transmission options are available. To enable an option, click the corre-
sponding button:
4. Click Send to start the transmission.
Sometimes you must log on before transmitting a data file. If this is the case, when
the Sending Data window opens and displays Connected, you may type a message
(10s), click OK to access the text box. There you can type any text needed to log in to
the remote computer.
.
Defer call to a later date/time.
Phone card dialing (must be set up in the General Configuration)
7 PhoneTools
Opens the Send File dialog box, which allows
you to perform automatic data file transfers.
Opens the Inbox.
to display the Send File dialog
to select the file to be sent.
Text box.
Connection message.
79
Advertisement
Table of Contents
