Multi- Tech’s Global Wizard. Figure 1. MT5634MU A detailed MT5634MU User Guide is provided with your unit and at http:/ /www.multitech.com. From the MTS homepage, click Support | Manuals | MultiMobileUSB and choose MT5634MU to download the .pdf file.
Figure 2. Unpacking Installation Steps Step 1: Connecting the Modem to Your System Connect the MT5634MU to your computer’s USB port and connect the telephone line to your MT5634MU and a telephone wall jack. Figure 3. Modem connections USB Connection Plug the USB cable connector on the modem into a USB port connector on your computer.
Installation Step 2: Installing the Modem The MT5634MU is compatible with Windows XP, 2000, ME, 98, and some versions of Windows 95. Installation in Windows XP Power up your Windows XP system. If you have not already done so, make all the necessary connections, including connecting the modem to an available USB port.
Page 6
Click Finish to complete the installation and exit the wizard. After installation is complete, you should test the operation of your new MT5634MU by registering it. Key in the URL given below and follow the on-line instructions at: http://www.multitech.com/register...
Windows ME will detect that the new modem is present and launch the Add New Hardware Wizard. Place the MT5634MU CD into the CD drive of your PC. The first Add New Hardware Wizard screen displays the message “What would you like to do?” Choose “Specify the location of the driver (Advanced)”...
Page 8
Add New Hardware Wizard. The first screen indicates that the wizard will search for a USB driver. Place the MT5634MU CD into your CD drive and click Next to proceed with the installation. The Add New Hardware Wizard dialog box displays with the message “What do you want Windows to do?”...
Page 9
Note: Dialog boxes for the Windows 95 installation are not shown because they may vary depending on the version of Windows 95 being used. If you would like to install your MT5634MU in Windows 95, perform the following steps. Insert the MT5634MU Installation CD into your CD drive.
Therefore, before you use the modem, you must configure it to match the defaults of the country in which you are using it. You can configure the MT5634MU either manually using AT commands (see User Guide), or with the Global Wizard, as described below.
Need help?
Do you have a question about the MT5634MU and is the answer not in the manual?
Questions and answers