Table of Contents
Advertisement
MessageSaver User Guide
Activating and Configuring Independent Mode
The Independent Mode Configuration dialog box enables you to select Indepen-
dent mode operating options and choose how Independent mode will be enabled.
Selecting an Announcement
A greeting message, or announcement, must be saved to the MessageSaver before
Independent mode will work. The announcement can be recorded directly on the
MessageSaver from a remote phone (see Chapter 3) or downloaded from Phone-
Tools to the modem.
Click to manually enable or disable
Independent mode.
Select to automatically enable Independent mode
when you exit PhoneTools.
Select to turn on the modem speaker while a caller
is leaving a message, to allow call screening.
Type a four-digit access code to use when retrieving
messages remotely.
To record an announcement from a remote phone, see "Controlling the MessageSav-
er Remotely" in Chapter 3. To record an announcement in PhoneTools for down-
loading to the MessageSaver, see "Recording an Announcement" in this chapter.
To select an announcement in PhoneTools
1. Open the Independent Mode Configuration dialog box.
2. Click the down arrow in the Announcements box, and select an announcement.
3. Click Download on modem to store the announcement on the MessageSaver.
68
To use a PhoneTools announcement,
select the announcement from this list,
then click Download on modem.
Advertisement
Table of Contents
