Introduction; What You Will Need; We Supply; You Supply - Multitech MessageSaver MT5634MSV User Manual

MessageSaver User Guide

Introduction

We know you are eager to get your MessageSaver up and running, so we'll show
you step-by-step how to set it up, check it out, and make your first calls.

What You Will Need

Before starting, please make sure you have everything you need:

We supply

4
A MessageSaver data/fax/voice messaging modem
4
A DC power supply module
4
A set of four plastic feet
4
A modular telephone cable
4
An MT5634MSV setup disk
4
A Quick Start Guide
4
A compact disc containing PhoneTools data, fax, voice, and messaging software,
the MessageSaver User Guide, and other programs

You supply

4
A computer with an unused serial port
4
A shielded RS-232 serial cable with a male DB-25 connector on one end and a
connector to match your computer's serial port on the other end
4
A nearby AC power outlet
4
A nearby telephone line jack
4
An optional PC stereo microphone
4
An optional headset, amplified speaker, or sound card with speakers
4
For connecting to a sound card, an optional male-to-male stereo patch cord with
1/8-inch mini plugs

Safety Warnings

• Use this product only with UL- and CUL-listed computers.
• To reduce the risk of fire, use only 26 AWG or larger telephone wiring.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is specifically de-
signed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Avoid using a telephone (other than a cordless type) during an electrical storm;
there is a risk of electrical shock from lightning.
• Do not use a telephone in the vicinity of a gas leak.
6