Programming Menues - golmar 3403 Instruction Manual

DOOR PANEL PROGRAMMING
Coming from previous page
repertory:insert
jose perez
:000012 :000041
inserting...
repertory:modify
jose perez
:000012 :000041
repertory:delete
jose perez
:000012 :000041
deleting...
R
epertory menu.
Allows to insert a new entry in a specific repertory
position. This function allows to keep the
repertory sorted.
Press OK: the display will show the first repertory
position: in case of no existing entries the
O.K. display will show the message
repertory
. Use the arrow keys to find the
empty
desired position and press OK: the new entry
will be inserted before theselected position.
Proceed as described on
repertory:new
menu.
Once the inserted entry has been recorded the
O.K.
display will show the message
inserting...
while sorts the repertoy and will return to
the initial screen. Repeat this procedure
to insert as much entries as it is needed.
Allows to modify the details of an exisiting entry.
Press OK: the display will show the first repertory
position: in case of no existing entries the
display will show the message
repertory
empty . Use the arrow keys to find the entry
O.K.
to be modified and press OK.
Proceed as described on
repertory:new
Once the new entry has been modified
the display will show the message
settings recorded , and will return
to the initial screen. Repeat this procedure
to modify as much entries as it is needed.
O.K.
Allows to delete an exisiting entry.
Press OK: the display will show the first repertory
position: in case of no existing entries the
display will show the message repertory
. Use the arrow keys to find the entry
empty
O.K. to be deleted and press OK.
The display will show the message
deleting...
Once the entry has been deleted, the display
will show the next entry. Repeat this procedure
to delete as much entries as it is needed.
O.K.
Continue
18 19
Coming from previous page
repertory:t
sending...
repertory:r
receiving...
deleting...
.
IMPORTANT: the repertory content can be only transmitted between two equipments:
NEVER place more than one system in both transmission or reception modes.
It's possible that, during transmission, other of the installed equipments random
operates (call receptions, lock release activations, ...): that's normal.
End of the repertory. Use "UP" arrow key to move to the previous options.
Press CANCEL to exit from the repertory menu and return to the main menu.
If CANCEL is pressed twice the panel will exit from the programming menu.
DOOR PANEL PROGRAMMING
R
It is possible to transfer the repertory content
x
to other panel or porter's exchange in the
same installation. Before to start with the
transmission, the receiving equipment
must be ready for reception (see next menu).
O.K. Press OK to start the transmission. The display
will show the message
sending...
095
the transmitted position number.
Once the transmission has been finished,
both equipments will exit from their

programming menues.

Allows to receive the repertory content from
x
other panel or porter's exchange in the
same installation.
Press OK to start with the reception and place
the transmitter in transmission mode
O.K. (see previous menu). The display will show
the message
receiving...
095
the received position number.
Once the reception has been finished,
the receiving equipment will delete the rest
of its repertory and the message
will be shown on the display.
Finally, both equipments will exit from their
programming menues.
epertory menu.
and
and
deleting...