Programming Menues - golmar 50124319 Instruction Manual

128
Coming from previous page
repertory:t
sending...
repertory:r
receiving...
deleting...
IMPORTANT: the repertory content can be only transmitted between two equipments:
NEVER place more than one system in both transmission or reception modes.
It's possible that, during transmission, other of the installed equipments random
operates (call receptions, lock release activations, ...): that's normal.
End of the repertory. Use "UP" arrow key to move to the previous options.
Press
If
DOOR PANEL PROGRAMMING
x
095
x
095
to exit from the repertory menu and return to the main menu.
is pressed twice the panel will exit from the programming menu.
It is possible to transfer the repertory content
to other panel or porter's exchange in the
same installation. Before to start with the
transmission, the receiving equipment
must be ready for reception (see next menu).
O.K. Press to start the transmission. The display
will show the message
the transmitted position number.
Once the transmission has been finished,
both equipments will exit from their

programming menues.

Allows to receive the repertory content from
other panel or porter's exchange in the
same installation.
Press to start with the reception and place
the transmitter in transmission mode
O.K. (see previous menu). The display will show
the message
the received position number.
Once the reception has been finished,
the receiving equipment will delete the rest
of its repertory and the message
will be shown on the display.
Finally, both equipments will exit from their
programming menues.
R
epertory menu.
sending...
and
receiving...
deleting...
and