Programming Menues; Fast Repertory Search - golmar CE-990 Plus Instruction Manual

PORTER'S EXCHANGE PROGRAMMING
Coming from previous page
repertory:t
x
sending... 095
repertory:r
x
receiving... 095
deleting...
IMPORTANT: the repertory content can be only transmitted between two equipments:
NEVER place more than one system in both transmission or reception modes.
It's possible that, during transmission, other of the installed equipments random
operates (call receptions, lock release activations, ...): that's normal.
End of the repertory. Use "UP" arrow key to move to the previous options.
Press CANCEL to exit from the repertory menu and return to the main menu.
If CANCEL is pressed twice the panel will exit from the programming menu.
R
epertory menu.
It is possible to transfer the repertory content
to other porter's exchange or panel in the
same installation. Before to start with the
transmission, the receiving equipment
must be ready for reception (see next menu).
O.K. Press OK to start the transmission. The display
will show the message and
sending...
the transmitted position number.
Once the transmission has been finished,
both equipments will exit from their

programming menues.

Allows to receive the repertory content from
other porter's exchange or panel in the
same installation.
Press OK to start with the reception and place
the transmitter in transmission mode
O.K. (see previous menu). The display will show
the message and
receiving...
the received position number.
Once the reception has been finished,
the receiving equipment will delete the rest
of its repertory and the message
deleting...
will be shown on the display.
Finally, both equipments will exit from their
programming menues.
17 18
PORTER'S EXCHANGE PROGRAMMING
To introduce or edit text during programming, use the keypad as described. The maximum
number of characters in one text line is 16.
Use the numeric keys to introduce text: press several times the corresponding key till the
desired character appears on the display, according with the enclosed characters table.
O.K.
C
ANCEL
1
4
7
For fast searching press one of the arrow keys followed by the number of entries to be
skipped. For a faster search use arrow keys followed by number 0 (10 in 10 entries)
or key symbol (100 in 100 entries).
Use the arrow keys to move through the display.
Use the key symbol to delete the actual character. The rest of the text
will be moved one position backward.
Press OK to record the whole text. The display
will show the message
settings recorded
Press CANCEL key to exit from edition. The former text will be restored
and the display will show the message
2
5
8
0
The search is realized of 5 in 5 entries. From that moment, each time
5
an arrow key is pressed the repertory advances 5 in 5 entries.
T
ext edit.
.
.
cancelled
3
6
9
F
ast repertory search.