Advanced Programming (Monitor Functions) - golmar TEKNA HF GTWIN User Manual

TEKNA HF GTWIN MONITOR

ADVANCED PROGRAMMING (MONITOR FUNCTIONS)

Advanced programming of the functions of the Tekna HF Gtwin monitor:
Advanced programming enables the monitor's default settings to be changed:
Then adjust the settings as required:
- Changing the door panel ringtone melody:
The monitor enables selection of the ringtone (5 different tones).
- Changing the ringtone melody from the apartment front door:
The monitor enables selection of the ringtone from the apartment front door (5 different tones).
- Activating/deactivating the doctor mode function: Doctor mode not activated (default setting).
The 'doctor mode' function enables the main lock release to be activated automatically 3 seconds after making a
call from the door panel without having to establish communication or press door release button
ends after 15 seconds and the channel becomes free.
(Only the master monitor should be configured with 'doctor mode').
- Exiting programming mode:
With the monitor in standby:
Press button
3 short audible tones will confirm this and the monitor's programming
LED will blink (yellow) slowly, indicating that button
Select the ringtone melody from the apartment front door: Press button
melody is heard 'carousel mode.'
Select the ringtone melody: Press button
To activate doctor mode: Press button
is activated; if it is pressed again, an audible tone will indicate that the function will change
its status to deactivated and so on. The monitor's programming LED will blink (green) slowly
when the monitor exits programming mode and is in standby.
To exit 'programming mode,'
audible tones will confirm this and the programming LED will turn off, indicating that button
can be released.
Note: When exiting programming mode, if 'doctor mode' has been activated, the monitor's
programming LED will blink slowly (green), see p. 4.
for more than 5 seconds to access 'programming mode,'
until the desired melody is heard 'carousel mode.'
once, an audible tone will indicate that the function
press button for more than 5 seconds, 1 short and 2 long
12
can be released.
until the desired
. The call