5
Test Functions
8
5.11
Event Log
Function not available at A2+ !
Access only when service key is inserted!
The label printer saves the following events in the Event log:
•
Hardware fault
•
Printhead replacement with a change in resolution
•
Adjustment of the label sensor
•
Firmware updates
•
Resetting of the service counters
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
Insert service key into a USB master interface.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Press the menu button.
Select Test > Event log print menu.
Start printout with the button.
Mach4/300 - 10/09/2007 -15:49:55
Firmware V3.11 (Aug 9 2007) - #111070553751
Bootloader V1.18 (May 29 2007)
Date/Time
23/05/2007/13:16:13 TPH-> 12dot/mm, 1248 dots
11/06/2007/07:51:24 Firmware upd. (V3.10 Jun 27, 2007)
11/06/2007/07:53:11 Adjust gap sensor: 1/3,14/85
23/08/2007/13:40:27 Firmware upd. (V3.11 Aug 9, 2007)
23/08/2007/15:41:28 PPP reload 3: 220907
Fig.
20
Event log
Description
Event log
8