Log Data 1 & 2 - Aeris Manta Operating Manual

LOG DATA 1, information includes (Fig. 59):
> NIBG with the maximum accumulation segment flashing,
others fixed up to end-of-dive accumulation. All segments
flashing if a Violation occurred.
> Graphic NO-D, DECO, GAUG, or VIOL indicating the
type of dive when completed.
> Log icon.
> Pre dive Surface Interval time (hr:min) with SURF and TI E
icons, ‘blank’ for Dive #1 of a series.
> Elapsed Dive Time (hr:min) with DIVE and TI E icons.
> Nx icon, if FO2 was set for Nitrox.
 Pressing and releasing the S button momentarily (< 2
seconds) button will advance to the LOG DATA 2 screen.
 Depressing and holding the button for 2 seconds or if
no button is pressed during a 2 minute period operation
will revert to the NOR (or GAUG) SURF AIN screen.
 Pressing the L button will activate the Backlight.
LOG DATA 2, information includes (Fig. 60):
> Log icon.
> aximum Depth achieved with AX and FT (or ) icons.
> Temperature (minimum recorded that dive) with degrees
icon and graphic F (or C).
> Nx icon, if FO2 was set for Nitrox.
 Pressing and releasing the S button momentarily (< 2
seconds) button will advance to the LOG DATA 3 screen.
67