Post Dive Surface Mode; Transition Period - Aeris Manta Operating Manual

96

POST DIVE SURFACE MODE

When you ascend to 2 FT (0.6 ), the anta will enter
Surface ode and begin counting your Surface Interval.
TRA SITIO PERIOD
If you descend during the first 10 minutes after surfacing
(referred to as the Transition Period), time underwater will be
considered a continuation of that dive. The time at the surface
(if less than 10 minutes) will not be added as Dive Time.
Transition Period information on the surface includes (Fig. 90):
> NIBG, representing Nitrogen loading.
> Graphic NOR alternating with the graphics SEA (or EL 2
through EL 7) and WET (if wet). If a Low Battery condition
occurs during a dive, the message CHNG > BATT will
scroll upon surfacing.
> Battery icon if a Low Battery Warning Condition exists,
flashing if Too Low.
> Surface Interval Time (hr:min) with SURF and TI E icons.
> Dive Number with DIVE icon.
> Nx icon, if FO2 is set for Nitrox.
During the Transition Period, Alternate displays and the Log for
that dive can be accessed. Other modes (e.g., Plan, Fly, Sat,
Hist, Set) will be accessible after 10 minutes on the surface.