Wet Activation Contacts; Watch Time; Dive Computer Main - Aeris Manta Operating Manual

WET ACTIVATIO CO TACTS
The Wet Contact Dive ode Activation feature is active any
time WET ACTIVATION is set ON.
The anta is configured with contacts that will automatically
activate Dive ode when the space between the contacts is
bridged by a conductive material (immersed in water) and it
senses a Depth of 5 FT (1.5 ) for 5 seconds.
The contacts are the pins of the PC Interface Data Port and the
stems of the Push Buttons.
As long as the contacts are bridged on the Surface, the
graphic WET will alternate with the Day of Week graphic
( ON - SUN) on the Watch ain and Alternate Time screens
(Fig. 68), and the graphics NOR and SEA (or EL2 to EL13)
on the NOR , GAUG, and FREE Surface ain screens (Fig.
69).
Upon removing the bridge between the contacts (drying the
anta), the graphic WET will no longer be displayed.
The anta will continue checking for Depth, until a dive is
made or it reverts to the Watch Time screen after 2 hours.
78