Set Free Depth Alarm 2 (Fda2) Display - Aeris Manta Operating Manual

The range of
available DA 2
Set Points begins
at the next T/M
value greater
than the DA 1
Alarm Set Point.
114
 Depressing the button for 2 seconds, or if no button is
pressed during a period of 2 minutes, the display will
revert the FREE SURF AIN screen.
SET FREE DEPTH ALARM 2 (FDA2) DISPLAY, information
provided includes (Fig. 105) -
> Graphic FDA2.
> Depth alarm value, flashing if ON is displayed, with AX
and FT (or ) icons.
> Set Point ON or OFF, flashing.
 Pressing/releasing the S button momentarily (< 2 seconds)
will toggle the Set Point between ON and OFF.
 Pressing/releasing the A button momentarily (< 2 seconds)
will accept the ON/OFF settings.
> If OFF is selected/accepted, Set FDA 3 will be bypassed
and the display will revert to the FREE SURF AIN screen.
> If ON is selected/accepted, the Depth value displayed will
flash.
 Pressing/releasing the S button momentarily and
repeatedly (< 2 seconds each time) will step through the
Set Points from 40 to 330 FT (11 to 100 ) in increments
of 10 FT (1 ) at a rate of 1 Set Point per press of the
button.