Set Free Cdt Status Display (Surface Only) - Aeris Manta Operating Manual

110
OTE: During a dive, the CDT can be turned
OFF (stopped) and O (started), but not Set.
SET FREE CDT STATUS DISPLAY (SURFACE O LY),
information provided includes (Fig. 101) -
> Graphic TI R, solid.
> Timer setting (min:sec) with the TI E icon, colon solid,
INUTE Set Point flashing.
> Graphic SEt, solid.
 Depressing/holding the S button while the INUTE Set
Point is flashing will scroll through the Set Points at a rate
of 4 per second from 0: to 59: in 1 inute (1:)
increments.
 Pressing/releasing the A button momentarily (< 2 seconds)
will save the INUTE Set Point displayed and advance to
Set SECONDS with the Set Point flashing.
 Depressing/holding the S button while the SECONDS Set
Point is flashing will scroll through the Set Points at a rate
of 4 per second from :00 to :59 in 1 Second (:01)
increments.
 Pressing/releasing the A button momentarily (< 2 seconds)
will save the CDT Set Point indicated by the graphic OFF
flashing (Fig. 102) in place of the graphic SEt.
 Pressing/releasing the S button momentarily (< 2 seconds)
will toggle to ON and Start the CDT.