Set Norm/Gaug Sampling Rate; Serial Number (Sn) - Aeris Manta Operating Manual

58
SET ORM/GAUG SAMPLI G RATE, information includes
(Fig. 52):
> Graphics SA P and SEC
> Set Point (seconds), flashing, with TI E icon.
 Pressing and releasing the S button momentarily (< 2
seconds) will step through the Set Points of 2, 15, 30, 60
(seconds).
 Pressing and releasing the A button (< 2 seconds) will
accept the setting and/or advance to the SET U screen.
 Depressing and holding the button for 2 seconds or if
no button is pressed for a period of 2 minutes operation
will revert to the NOR or GAUG SURF AIN screen.
SERIAL UMBER (S )
 Depressing the A and S buttons simultaneously for 8
seconds while viewing the NOR (or GAUG) SURF AIN
screen will access the SN screen displaying (Fig. 53):
> Graphic SN
> Factory programmed Serial Number of the anta.
> Firmware revision number (e.g., graphic r1A).
 Depressing the A and S buttons simultaneously for 2
seconds will revert to the NOR (or GAUG) SURF AIN
screen.