Load Default Time; Watch Main Time; Watch Alternate Time - Aeris Manta Operating Manual

LOCAL DEFAULT TIME
Watch Main Time (Fig. 5) is the current Time at your home
location and is normally selected as the Local Default Time.
The normal Watch screen sequence accessed with momentary
presses (less than 2 seconds each) of the button is -
ain Time > Alternate Time > Countdown Timer >
Chronograph > Daily Alarm
Watch Alternate Time (Fig. 6), which is set by Hour
Differential, is the current Time at a remote travel location.
Upon arrival at the location, Alternate Time can be inter-
changed with ain Time to make it the Local Default Time
while visiting the travel location.
The button will then access the screens in this sequence -
Alternate Time > ain Time > Countdown Timer >
Chronograph > Daily Alarm
While viewing Alternate Time, depressing and holding the S
button for 2 seconds will replace ain Time with Alternate
Time that will then become the Local Default Time until
changed.
18