Norm Plan Mode - Aeris Manta Operating Manual

 Depressing and holding the button for 2 seconds or if no button is pressed
for a period of 2 minutes operation will revert to the NOR or GAUG SURF
AIN screen.
OTE: The Serial umber and Firmware Revision will be
requested in the event that you contact AERIS regarding the
Manta. Enter them in the Records section provided in the back
of this Manual.
ORM PLA MODE
AERIS strongly recommends that you review the PDPS (Pre Dive
Planning Sequence) prior to every ORM dive to help you Plan your
dive as required to avoid exceeding no decompression or oxygen
exposure limits. This is especially important for repetitive dives when the PDPS
indicates adjusted dive times that are available for the next dive, based on
residual nitrogen or oxygen accumulation (whichever is in control) following the
last dive and surface interval.
OTE: Calculated o Decompression Dive Times in PLA
MODE are based on the FO2 setting selected.
 Pressing and releasing the A button momentarily (< 2 seconds) 1 time while
the NOR SURF AIN screen is displayed will access the PLAN ODE
LEAD-IN screen.
NOR SURF > PLAN LEAD-IN
59