Removing The Freezer Or Refrigerator Door - KitchenAid KSSC36FKB00 Technical Education

REMOVING THE FREEZER OR REFRIGERATOR DOOR

Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
power.
2. Remove the main and louvered decora-
tive panels (see page 4-2).
NOTE: If the freezer door has a water and ice
dispenser, it will be necessary to remove the
refrigerator from its mounting location in order
to disconnect the wiring harness. To do this,
perform step 3. If the freezer door does not
have a water and ice dispenser, skip step 3,
and proceed to step 4, on page 4-28.
3. To remove a freezer door with a water &
ice dispenser:
a) Remove the two screws from the base
grille and remove the grille.
Base Grille
Screw
b) Use the leveling screws and lower the
Refrigerator is top heavy and tips easily
when not completely installed.
Keep door taped closed until refrigerator
is completely installed.
Use two or more people to move and
install refrigerator.
Failure to do so can result in death or
serious injury.
c) Pull the refrigerator out of its mounting
Screw
4-26
refrigerator onto the four rollers.
Leveling Screws
Rear Front
Tip Over Hazard
location.