KitchenAid KSSC36FKB00 Technical Education page 39

10. To remove the evaporator:
a) Remove the defrost heater from the
evaporator (see pages 4-11 & 4-12).
b) Access the sealed system and dis-
charge the refrigerant into an approved
recovery system.
c) Remove and replace the evaporator.
Defrost
Heater
Evaporator
REASSEMBLY NOTES:
1. The evaporator fan motor shroud has a
foam insert on each side. Note the position
of these inserts in the photo and reinstall
them correctly, as shown.
Evaporator Fan Motor Shroud
2. Be sure to reinstall the right foam block at
the location shown below.
4-13
Foam Blocks
Right Foam Block