4.
Remove the door switch & bracket for the
refrigerator or freezer door (see page 4-4
for the procedure).
5.
With the door closed, remove the hex-
head screw from the door linkage at the
top of the door.
Door Linkage Screw
4-28
NOTE: The door spring will remain under slight
tension when the door is closed.
6.
Use a pair of pliers and lift the end of the
linkage off the square post.
7.
Place a support under the door that you
are removing to prevent it from falling.
8.
Remove the four hex-head screws from
the door hinge.
9.
Grasp the door firmly and lift it off the
bottom hinge pin.
Disconnect End
Of Spring
Lift Door
Linkage Off Post
Door Hinge
Screw
(1 of 4)