KitchenAid KSSC36FKB00 Technical Education page 53

d) Disconnect the water & ice dispenser
electrical harness connector at the back
of the refrigerator.
Water & Ice Dispenser
Electrical Harness Connector
e) Use a putty knife, slide the retainer clips
off the door channel, and pull the wiring
and water line out from under the chan-
nel.
Clip
f) Position a container to catch the water
in the next step.
Door Channel
4-27
g) Disconnect the water reservoir tubing
nut at the union and remove the nut
from the end of the tubing.
Water Reservoir
Union Nut
h) Remove the hex-head screw from the
green ground wire on the water & ice
dispenser wiring harness.
Electrical Shock Hazard
Connect green ground wire to ground
screw.
Failure to do so can result in death or
electrical shock.
Continued on the next page.
Water & Ice Dispenser
Electrical Harness
Harness Ground