f) Remove the hex-head screws from the
right evaporator cover mounting bracket
and remove the bracket. Be careful not
to drop the screws down the drain hole
at the bottom of the liner. Cover the hole
with a cloth.
g) Remove the foam block from the right
side of the evaporator.
NOTE: Be very careful not to over-bend
the refrigerant tubing.
h) Lift the evaporator up slightly and un-
hook it from the liner, then pull the
bottom of the evaporator toward the
front of the unit.
Right Evaporator Cover
Mounting Bracket
Right Foam Block
i) Bend the two hangers at the bottom of
the evaporator.
Bend The Two Hangers
j) Unfasten the two metal clips from the
right side, and slide the defrost heater
down and off the evaporator.
Right Side Clip
4-12
Defrost Heater