Removing The Freezer Door Handles & Freezer Door - KitchenAid KSBP25FKSS00 Technical Education

Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
power.
NOTE: The refrigerator door and handles are
removed in the same manner as the freezer
door, except that the ice & water dispenser
lines are not present.
2. To remove a door handle:
a) Slide the top handle trim up to release
the shoulder screw from the trim brack-
et and remove the trim.
REMOVING THE FREEZER DOOR
HANDLES & FREEZER DOOR
Trim Bracket
b) Similarly, slide down and remove the
bottom handle trim.
c) Remove the four hex-head screws and
remove the handle from the door.
2 Screws
Freezer Handle
2 Screws
3. To remove the freezer door:
a) Open the refrigerator and freezer doors
and remove the two screws from the
base grille and remove the grille from
the front of the unit.
Screw
Continued on the next page.
4-23
Screw
Base Grille