KitchenAid KSSC36FKB00 Technical Education page 31

4. To remove a door switch (Revised De-
sign):
a) Remove the two hex-head screws from
the door switch cover and remove the
cover.
Door Switch Cover Screws
Door Switch
b) Disconnect the wire connectors from
the door switch terminals.
c) Press in on the locking arms and push
the switch out of the bracket.
5. To remove the power switch:
a) Remove the unit compartment front
cover, pull the cover forward, and turn
it over (see step 5 on page 4-2 for the
procedure).
Power Switch
b) Remove the four wire connectors from
the power switch terminals.
c) Press in on the locking arms and push
the switch out of the cover opening.
Locking
Arms
6. To remove the inverter assembly:
a) Remove the two hex-head screws from
the air diverter and remove the diverter.
b) Remove the three remaining hex-head
screws from the front guard and re-
move the guard.
Front
Guard
c) Remove the hex-head screw from the
front of the inverter assembly.
Retaining Bracket
Continued on the next page.
4-5
Locking
Arms
Inverter
Assembly
Screw
Air
Diverter
Screw
Screw